How to Repair a Saab 93 Key Fob
There's a good possibility that the key fob of your Saab 9-3 is defective in its electronic chip. The metal part of classic car keys is simple to copy. Modern key-fobs however, have an immobilizer to guard your vehicle.
The first step in determining the reason why your key fob isn't working is to replace the coin battery. This is a cost-effective and easy fix.
How do I program a Saab 93 key fob
Saab key fobs let you to control the doors of your car, trunk and engine. They also unlock the fuel door as well as activate a panic button. These remotes can also be programmed with the transmitter in your car. To do this, place the key in the ignition and turn it on to the ON position. Follow saab fob key replacement on the Tech2 until you have programmed all the keys that you want to function with the vehicle.
Saabs are typically sold with just one key, though they were originally designed with two. You can get another key by replacing the transmitter (which includes the transponder) and programming it in using a handheld computer known as a Tech-2 at your Saab dealer. You'll also require a new key to match the old one in order to work. This is a pricey task however it's cheaper than replacing the entire CIM system and locking cylinders in the event that you lose the sole key that works.
Saab key fob replacement for 93
Saab owners who lost their keys should get an extra key as soon as they can. The key fob is not like the classic metal keys used in cars a few years ago, but is an electronic device that communicates with the car via a special chip. This is how the car can recognize the key fob and prevents it being copied. Dealers may be able to copy the key however it can be costly. It is recommended to avoid this issue by getting a replacement Saab key from an online retailer.
The main reason for having an additional key is to make your car more secure in the event that you ever lose it. A burglar is more likely locate a spare key rather than a stolen one. The majority of thieves do not have the equipment necessary to copy these modern keys. They'd require a special machine to accomplish this but that's not a guaranteed method of protecting your car from theft.
Another benefit of having an extra key is that it can save you money when replacing the battery in your SAAB 9-3 remote key. The electronic units of the keyfob come with batteries and eventually, they will fail. The process of replacing the battery is simple, but be careful not to harm the electronics inside the case. You can watch videos on Youtube to learn how to do this job, like the Cyclone Cyd videos.
Saab 93 key fob battery
If you've had trouble with the delay in response from your key fob, then it's time to replace the battery. A dead battery may be the cause of the delay. However there are other possible reasons. It's an inexpensive and simple fix, so you shouldn't delay in tackling it.
The first step is removing the backup key from the fob. To do this, press hard on the Saab logo and pull it off the key loop. Then, insert a flathead screwdriver in the indentation on the key fob case. Turn the screwdriver around to separate the case. It shouldn't require a lot of force, but be cautious not to break the plastic.
Once the case has been opened, you can see the electronic components inside. The circuit board is attached to the metal clips. If these clips are rusty, or dirty the fob won't work properly. You can clean the fobs by ruby alcohol. It's important to remember that this is a temporary solution. The clips will eventually wear out and will need to be replaced.
Test the car door locks with the backup remote prior to replacing the battery. If the backup remote works then the issue is most likely related to your primary key fob. If the issue persists after replacing the battery, it may be something else wrong with your vehicle.
Saab keyfob 93 case
A new case is available if your key fob looks worn-out. These are available online and can be easily installed to your existing remote. All you need is a flathead screwdriver and a bit of patience. Simply insert the screwdriver into the slot in the middle of the battery and gently work it to split open. Be careful not to scratch the limiters that hold the battery. The new case will be inserted into the existing electronics after removing the emergency badge and key. No reprogramming is needed.
The most effective key fob cover has a lining that blocks signals from being sent to the key fob. This is essential, since it's the signals that allow your vehicle to start. Some of these cases have silver layers while others are made from copper to help distort transmissions more effectively.
Key fobs are the perfect way to protect your keys. It will help keep track of your key fob and assist you in the dark when you get to your vehicle. A key fob will protect your keys from theft and add some elegance to your keys.